September 27, 2021
As we all know, the excavator gp buckets is an important part of the working device of the excavator. The excavator gp buckets is the most used accessory when the excavator comes out in some specific work situations. However, compared with the main components such as the engine and hydraulic parts in the excavator, the simple structure of the excavator bucket often does not get too much attention from the users, so does the bucket really need no maintenance? The answer is naturally NO!
As the saying goes: "Workers must first sharpen their tools if they want to do good things!" Not to mention that there are dozens of different types of buckets for you to choose from in the market for different working conditions. Just maintain your existing shovel. Do you believe that it can increase construction efficiency and control construction costs?
In fact, many excavator users generally have misunderstandings about the excavator gp buckets. Most people believe that the larger the excavator bucket, the higher the construction efficiency; the thicker and stronger the excavator bucket, the longer the service life, and then the excavator will dig The bucket is blindly reinforced. This approach is not accepted by Euro-African Machinery. If the bucket is protected in an all-round way, then the weight of each bucket will be increased. A heavy bucket will not only increase the fuel consumption of the machine, but also overload operation. The life of the machine also has a considerable impact, and this little loss cannot be ignored.
An expert once did a study: for every 0.5 ton increase in bucket weight, the cycle time increases by 10%, and the annual gross profit will decrease by 15%. In fact, under normal circumstances, the standard excavator gp buckets provided by the manufacturer are all reasonably structured and designed, and they are fully qualified for general working conditions. If the conditions are really bad and need to be strengthened, then it is also recommended that you weld on the part that needs to be strengthened most, rather than the whole welding, and do not wrap the bucket of your love machine with thick armor. Excavator gp buckets teeth are the terminal of the working device of excavators. In the process of excavation operations, the bucket teeth are the work components with the largest load and belong to the consumable parts. Especially in the stone construction environment, the bucket teeth wear very fast. The use of bucket teeth can actually directly affect the work efficiency and production cost of the excavator. Just imagine, when the tip part of the excavator gp buckets teeth is worn more seriously, the excavator needs to cut in during the excavation operation. It will inevitably increase greatly, which will result in greater fuel consumption and affect work efficiency. Therefore, it is very necessary to replace the new bucket teeth in time when the wear of the bucket teeth is relatively serious.
In the daily maintenance work of the excavator, if you can check the fuel, lubricating oil, water and air every day, you can reduce the machine failure by 70%. If you want to make your love machine better and more economical in your daily work, then spend 2 minutes every day to check the excavator gp buckets.
