Spring hasn't passed yet, but the temperature has already risen swiftly, a bit like summer has arrived. But when the summer really comes, it won’t stop at this temperature, but even if it’s hot again, people may not worry about it, because we have air conditioners, a heat-relief expert, and we basically don’t worry about being heated up when working indoors, even some outdoors. The work is also air-conditioned. For example, when operating the excavator outdoors, the driver can also sit in the air-conditioned cab to carry out construction work. However, the human high temperature problem has been solved. Have you ever thought about the high temperature problem of machinery? In fact, high temperature also has an impact on the performance of the machine, so it is necessary to deal with the high temperature problem for the machine in time. Deal with the high temperature problem of the excavator long arm, do this.
One of the key points to deal with the high temperature of the excavator long arm is to prevent it first. How to prevent it? You can start with the parts related to the high temperature of the excavator long arm, that is, cleaning the iron screens outside the radiator. Sometimes the heat can not be dissipated in time because it is blocked by impurities, so we need to clean up the impurities on it, and it can be smooth Wind through the heat. The second is to check whether the belt of the cooling fan is loose, or whether it is worn too much, because in this case, the wind blowing out is not enough, and then it will cause high temperature.
In addition to the above two points, the water tank of the excavator long arm should be filled with antifreeze as much as possible, because water is more likely to cause scale in the water tank, which will block the heat sink and cause the water to fail to circulate. This situation will also cause high temperatures in the excavator long arm. Able to avoid mechanical high temperature, try to avoid it, do not wait until the high temperature to solve.