Excavator users generally have misunderstandings about buckets. Most people believe that the larger the komatsu excavator buckets, the higher the construction efficiency; the thicker the excavator bucket, the stronger the durability, the longer the service life, and then the excavator bucket is blinded. Of reinforcement. This approach is undesirable. If the bucket is protected in all directions, it will inevitably increase the weight of each bucket. A heavy bucket will not only increase the fuel consumption of the machine, but overloading will also have a considerable impact on the life of the machine. The impact of this loss cannot be ignored. Experts have done a study: for every 0.5 ton increase in bucket weight, the cycle period will increase by 10%, and the annual gross profit will be reduced by 15%. In fact, under normal circumstances, the standard buckets provided by the manufacturer are reasonably structured and designed, and they are fully qualified for general working conditions. If the conditions are really bad and need to be strengthened, it is also recommended that you weld the parts that need to be strengthened most, rather than the whole welding, and do not wrap the bucket of your love machine with thick armor.
Bucket teeth are the terminal of the working device of excavators. In the process of excavation operations, the komatsu excavator buckets teeth are the work components with the largest load and belong to the consumable parts. Especially in the stone construction environment, the bucket teeth wear very fast. The use of bucket teeth can actually directly affect the work efficiency and production cost of the excavator. Just imagine that when the tip of the bucket teeth wears more severely, the force required for the excavator to cut in during excavation is inevitable. Greatly increase, resulting in greater fuel consumption and affecting work efficiency. Therefore, it is very necessary to replace the new bucket teeth in time when the bucket tooth wear is more serious.
In the daily maintenance work of the excavator, if you can check the fuel, lubricating oil, water and air every day, then you can reduce the failure of the machine by 70%. If you want to make your love machine better in the daily work excellent and more economical, then spend 2 minutes a day to check the bucket. The main inspection contents are: the degree of wear of the komatsu excavator buckets body and whether there are cracks. If the degree of wear is more serious, reinforcement should be considered. As for the bucket body with cracks, welding repairs should be carried out in time to avoid increasing the length of the cracks due to delayed repairs, resulting in unmaintainable situations. In addition, use your feet to kick the bucket teeth to check whether the bucket teeth are stable. If the bucket teeth are loose, they should be tightened immediately.
For a long time, komatsu excavator buckets with simple structures often fail to attract users’ attention, which invisibly reduces construction efficiency and increases a lot of construction costs. I hope this article can arouse users’ friends to pay more attention to buckets. Let our love machine create more profits for us.