Everyone knows that the replacement range of an excavator with a long reach boom for excavator will be larger to compensate for the working conditions that ordinary excavators cannot achieve, but how to transform long reach boom for excavator ? Let's take a look at the tips provided by Huitong Heavy Industries. Now, the technology to replace excavators with extended booms is mature. We can look at large construction sites. More than 80% of the extension arms should be replaced because the construction efficiency is getting higher and higher. Compared with manual work, the efficiency of replacing long reach boom for excavator is very high.

Since the long reach boom for excavator is changed to an extension arm, the arm is equipped with an internal buffer plate to withstand the tensile load. The structural strength, performance and quality of the extension arm not only improve the construction quality, but also reduce the construction time, which greatly facilitates the construction, but does not mean that it can be modified. It can be changed randomly. There are also many parameters that can be used to replace an excavator with a telescopic boom, because there are many factors that can be used to change the telescopic boom on an excavator. The modification of the extension arm is nothing more than improving work efficiency and realizing the development of difficult working conditions, so even the modification of the 40-meter arm is very wasteful. Incomplete extension can also cause aging of the pipeline, so the excavator was modified according to the actual situation to extend long reach boom for excavator.

Since different specifications and parameters do not match the soil quality and building density, your main engineering modifications must match the parameters, because as long as the equipment has higher specifications and parameters, this function will be used more and more, so now Choose parameters according to tonnage. Of course, large excavators can operate with longer booms, etc., because this is a more cost-effective improvement and more scientific. No need to replace other equipment. Increase the workload of the excavator, so as not to reduce the service life of the excavator.