A hydraulic hammer, also referred to as an excavator hammer or breaker, is an incredibly powerful attachment designed for use with excavators. It is a vital tool in a variety of appliPCions, including construction, mining, quarrying, and demolition. It can easily break and demolish a range of materials such as concrete, asphalt, rocks and other hard surfaces.
This essential piece of machinery is composed of a cylinder, piston, and chisel. The piston is connected to an excavator control lever, and as the lever is engaged it will drive the piston up and down which will cause the chisel to move in and out of the rubber and small telescopic joints. This regular and powerful hammering action creates enough force to break apart the toughest materials.
The use of a hydraulic hammer can reduce the time and labor it takes to break apart hard surfaces. Its ability to quickly break through concrete and asphalt helps to increase the efficiency of many worksites.
When it comes to breaking and demolition, the hydraulic hammer is the ideal tool for the job. Whether it’s used for construction, mining, quarrying, or demolition, it will be a powerful ally.
Impact Energy Adjustment: Many hydraulic hammers allow for adjusting the impact energy or striking force according to the specific appliPCion or material being worked on. This feature enables operators to optimize the hammer's performance and avoid excessive force when necessary.
Auto-Stop Function: Some hydraulic hammers are equipped with an auto-stop function that automatically stops the hammer's operation when it encounters a significant resistance or when the material being broken is fully fragmented. This feature helps to prevent unnecessary wear and tear and increases the hammer's lifespan.
Noise and Vibration Reduction: Advanced hydraulic hammers incorporate technologies to reduce noise and vibration levels during operation. This not only improves operator comfort but also minimizes the impact on the surrounding environment.
Auto Greasing System: To ensure proper lubriPCion and maintenance, certain hydraulic hammers have an integrated auto greasing system. This system automatically delivers lubricant to critical areas, enhancing the hammer's longevity and efficiency.
Dust Suppression System: Some hydraulic hammers feature a dust suppression system that helps control dust generated during operation. This is particularly useful in demolition or quarrying appliPCions where dust control is essential for safety and environmental reasons.
Quick Coupler Compatibility: Many hydraulic hammers are designed to be compatible with quick coupler systems, allowing for rapid attachment and detachment from the excavator. This feature improves efficiency and saves time when switching between different attachments.
Durability Enhancements: Hydraulic hammers often incorporate durable materials, such as high-strength steel and reinforced components, to withstand the demanding conditions of heavy-duty appliPCions. Additionally, features like dust seals, shock absorbers, and protective covers help prolong the hammer's lifespan and reduce maintenance requirements.
Versatile Tool Options: Excavator hydraulic hammers offer a range of interchangeable tool options to suit different appliPCions. Common tools include moil points for breaking rocks, chisels for concrete demolition, and blunt tools for compacting or trenching.
The operating weight of a hydraulic hammer is the total weight of the hammer and its mounting bracket, usually measured in kilograms (kg) or pounds (lb).
Impact energy is an indiPCion of the force delivered when the hydraulic hammer strikes a material, typically measured in joules (J) or foot-pounds (ft-lb). The higher the impact energy, the greater the breaking power.
The hydraulic hammer is designed to work in combination with a certain range of excavator weights, which is typically indiPCed in the product specifiPCions. This range provides optimal performance.
The hydraulic hammer requires a specified pressure from the excavator hydraulic system to work, usually indiPCed in pounds per square inch (psi) or bar.
The hydraulic hammer requires a certain flow rate from the excavator's hydraulic system, typically mentioned in liters per minute (L/min) or gallons per minute (GPM).
The size of the tool, such as a moil point or chisel, used with the hydraulic hammer is often provided. This helps determine the size of the breaking area.
The vibration frequency of the hydraulic hammer indiPCes the number of impacts per minute, usually indiPCed in hertz (Hz) or blows per minute (bpm).
The type of mounting system used for the hydraulic hammer, such as featured mounts or quick coupler mounts, is usually mentioned in the product specifiPCions. This ensures compatibility with the excavator's attachment mechanism.
The acceptable pressure and flow rate ranges for the hydraulic hammer are also generally suggested in the technical parameters.
The warranty period offered by the manufacturer for the hydraulic hammer is also often mentioned in the technical parameters.
The Excavator Hydraulic Hammer is an ideal choice for those in need of a powerful, heavy duty hammer for a variety of appliPCions. With a Brand Name of Excavator Hydraulic Hammer, Model Number of HT123, Place of Origin from Guangzhou, China, and CertifiPCion of ISO9001, this hammer is built to last and is a reliable tool. This hammer also has a minimum order quantity of 1 set, with a price range of $2420-5500, depending on the model. The standard package ensures the product arrives safely and in one piece, and with a Delivery Time of 7-20days, you can get it in a timely manner. In addition, this product has a Product Name of Excavator Hydraulic Hammer, a weight range of 200-4500 Kg, and is made of Alloy Steel for durability and strength. It also has a Warranty of 1 Year and is 100%new. This Heavy Duty Hammer is perfect for those who need a powerful, reliable tool for their excavator hydraulic hammer needs.
At XXXXXX, we provide technical support and service for Excavator Hydraulic Hammer products. Our team of experienced and knowledgeable engineers are available to answer your questions and provide assistance with any problems you may have.
We provide a wide range of services, including but not limited to:
If you have any questions or need assistance with your Excavator Hydraulic Hammer, please contact us today. We look forward to helping you get the most out of your product!
A1: The brand name of this product is Excavator Hydraulic Hammer.
A2: The model number of this product is HT123.
A3: This product is from Guangzhou, China.
A4: This product is certified with ISO9001.
A5: The minimum order quantity for this product is 1 set.
