Bucket teeth are the terminal of the working device of excavators. In the process of excavation operations, the bucket teeth are the work components with the largest load and belong to the consumable parts. Especially in the stone construction environment, the bucket teeth wear very fast. The use of excavator HD bucket is good or bad, in fact, it can directly affect the work efficiency and production cost of the excavator.
When the tip part of the bucket tooth wears severely, the force required by the excavator to cut in during the excavation operation will inevitably be greatly increased, resulting in greater fuel consumption and affecting work efficiency. Therefore, it is very necessary to replace the new bucket teeth in time when the wear of the bucket teeth is relatively serious.
In the daily maintenance work of the excavator, take 2 minutes to check the excavator HD bucket every day.
The main inspection contents are: the degree of wear and tear of the excavator HD bucket body and whether there are cracks. If the degree of wear is serious, reinforcement should be considered. As for the bucket body with cracks, welding repairs should be carried out in time to avoid increasing the length of the cracks due to delayed repairs, resulting in unmaintainable situations. In addition, kick the bucket teeth with your feet to check whether the excavator HD bucket ruler is stable. If the bucket teeth are loose, they should be tightened immediately.
To properly maintain the excavator HD bucket, the bucket teeth are the key.